2010+ FORD RAPTOR STOCK WIDTH LOWER CONTROL ARMS

2010+ FORD RAPTOR STOCK WIDTH LOWER CONTROL ARMS
2010+ FORD RAPTOR STOCK WIDTH LOWER CONTROL ARMS - 2
2010+ FORD RAPTOR STOCK WIDTH LOWER CONTROL ARMS
2010+ FORD RAPTOR STOCK WIDTH LOWER CONTROL ARMS - 2

2010+ FORD RAPTOR STOCK WIDTH LOWER CONTROL ARMS

from $2,099.95

PT #’s:

1110210223 - Gen 3 Raptor Uniball LCA

1110210224 - Gen 3 Raptor Bushing LCA

1110170223 - Gen 2 Raptor Uniball LCA

1110170224 - Gen 2 Raptor Bushing LCA

1110100223 - Gen 1 Raptor Uniball LCA

1110100224 - Gen 1 Raptor Bushing UCA

Are you ready to strengthen up your suspension without having to run wider fenders? We have the solution with our Stock Width Upper Control Arms for all generations of Ford Raptors. These UCA’s feature Stainless Steel Misalignement Spacers along with Grade 8 Mounting Bolts. Through design and geometry these UCA’s give extra spring clearance during the down travel cycle while not sacrificing bump travel. These are 100% American Made and can be paired up with bushings or FK Heims. Through geometry these free up travel without any sacrifices. These come standard in a Satin Black Powder Coat Finish.

***Requires a minimum of a 0 Offset Wheel***

YEAR MODEL:
BUSHING OR UNIBALLS:
Quantity:
Add To Cart
Evil Offroad, 800 Margaret Street Ste 2, Pahrump, NV, 89048, United States562-330-1325info@eviloffroad.com

© 2024 EVIL OFFROAD LLC

EVIL OFFROAD LLC, is not affiliated with or endorsed by Chevrolet, General Motors, Ford Motor Company, Dodge, Ram, Nissan, Toyota, or any other vehicle manufacturer mentioned or whose logos are displayed in these web pages or our store. Ford®, and Raptor® are trademarks of Ford Motor Company. iPad® are trademarks of Apple Inc.. While we try to keep everything current, pricing is subject to change. All prices are in US Dollars. Some of these components and or parts are intended for off-road use only and may void Federal or state emissions standards, DOT regulations, local and state traffic regulations, or your private auto insurance policy. The End User assumes all risk with products performance and installation. EVIL OFFROAD LLC, is not responsible for any bodily or mechanical harm, etc. as a result of use or misuse of any products or product installation. Our Return Policy can be found above along with Terms and Conditions. Remember that using your truck or trucks offroad can result in serious injury. Make sure you have all of the proper safety equipment and that it has been installed properly and that none of your safety equipment has expired.

Note: It's very important to re-torque all nuts, bolts, lug nuts, etc. after each offroad trip and to check them every 1000 miles. All suspension installs require the vehicle to be brought back within 500-600 miles after installation for a nut and bolt check along with bolt re-torquing otherwise the labor warranty will be void.

Cart (0)